Yokomo YD-2E Plus RWD Drift Car Kit (Graphite Chassis)

Yokomo

Yokomo YD-2E Plus RWD Drift Car Kit (Graphite Chassis)

  • Sale
  • 0,00 lei
Tax included. Shipping calculated at checkout.
Features and Specifications:
  • Lenght: 425mm
  • Width: 198mm
  • Wheelbase: 256mm
  • Overdrive: 1:2.6
  • Over all weight:&nb sp;1500g
  • Mat finish graphite double deck chassis 
  • New Front short lower suspension arm
  • Aluminum SLF big bore oil damper
  • Alumium Front&Rear shock tower
  • Aluminum motor mount plate
  • 4WD indepencent double wishbone suspension
  • High angle steering system for RWD
  • 49mm bone rear universal shaft
  • Large rear difazer
More steering angle due to new Short Suspension Arm which has redesigned for prevent from interference with wheels, besides the location of steering stopper had also refined.
Longer stroke rear suspension arm is now available as standard bundled. By increasing the down-stroke amount, possible to pull out more rear roll aggressively and enhances traction and more stability.

Aluminum shock cylinders are the super low friction shock which is with Kashima coating to reduce the maximum frictional resistance with piston. The largest capacity in on-road car category, 11.2mm big bore cylinder has adopted and enable to absorb even small vibration due to run with a resin tire in a drift run from the road surface, then possible to get a maximum grip.

Height adjust system possible to change the car height by rotate the spring tensioner and suitable for various length on springs. Of course the setting that is most suitable for various road surfaces and run situation in total is provided by the change of shock oil and the piston to get a damping force with finely adjusted.

Innovative design of 4-gear transmissions for drift car.. Prevents the left/right imbalance due to the torque of the motor, by installing the motor in horizontal position and lead the neutral steering characteristics. Meanwhile, the rear traction will be increased on the throttle, so possible to escape when cornering stability and acceleration forces to withdraw. High dust-proof sealed gearbox is also attractive.

In addition, rear transmission gear is a lightweight type by using a plastic bevel gear. Contributes to the improved throttle response and performance.
Standard RC Car Battery are all possible to use at YD-2E series.  Standard/Short size Li-po Battery, Ni-Cd, Ni-MH, such as 6-cell battery also available.
Notice:

*The pictures are the assembled samples on prototype. It may changes at the production version without notice.

*The kit does not include body, wheels, tires, motor, batteries, pinion gear, and other R/C electrics.